Manufacturers

Home>DC/DCC Control>Address Changer for HO, N, Z, On30, On3 and more

Address Changer for HO, N, Z, On30, On3 and more

Address Changer for HO, N, Z, On30, On3 and more


£79.99

Broadway Limited Imports

BLI-1020



The simple way to program, read & reset DCC addresses!

We’ve heard it time and time again from our customers. Programming DCC addresses is a hassle and only a small percentage of hobbyists can actually perform this essential task. That’s why we’ve developed the Address Changer. This standalone device is specifically designed to make DCC address programming, reading and resetting a breeze!



Features:

  • Simple programming of DCC Addresses with the push of just a few buttons.

  • No confusing menus

  • Standalone design requires no preexisting DCC System

  • 8-pin NMRA decoder slot for use with aftermarket decoders

  • Program track output for preinstalled on-board DCC decoders

  • Program, read & reset DCC decoders and on-board DCC decoders individually or simultaneously

  • Works with all NMRA compliant decoders & locomotives in HO, N and Z scales

  • Power supply included

  • Use any piece of track as your program track!
 

DCC ADDRESS PROGRAMMING MADE SIMPLE!

  1. Plug in an 8-pin DCC decoder or place a locomotive on the Address Changer’s program track (or use both the 8-pin and program track to program, read, reset both decoders at once!).
     

  2. Read the current address, assign a new address or reset the decoder(s) to factory defaults with a few button presses.
     

  3. No separate DCC system required!